Nqa Server Enable; Nqa Server Tcp-Connect - HPE FlexNetwork 10500 Series Network Management And Monitoring Command Reference
Hide thumbs
Also See for FlexNetwork 10500 Series:
- Security command reference (881 pages) ,
- Security configuration manual (702 pages) ,
- Configuration manual (407 pages)
Table of Contents
Advertisement
Related commands
nqa server enable
nqa server tcp-connect
nqa server udp-echo
nqa server enable
Use nqa server enable to enable the NQA server.
Use undo nqa server enable to disable the NQA server.
Syntax
nqa server enable
undo nqa server enable
Default
The NQA server is disabled.
Views
System view
Predefined user roles
network-admin
mdc-admin
Examples
# Enable the NQA server.
<Sysname> system-view
[Sysname] nqa server enable
Related commands
display nqa server
nqa server tcp-connect
nqa server udp-echo
nqa server tcp-connect
Use nqa server tcp-connect to configure a TCP listening service to enable the NQA server to listen
to a port on an IP address.
Use undo nqa server tcp-connect to remove a TCP listening service.
Syntax
nqa server tcp-connect ip-address port-number [ vpn-instance vpn-instance-name ] [ tos tos ]
undo nqa server tcp-connect ip-address port-number
Default
No TCP listening services exist.
Views
System view
92
Advertisement
Table of Contents
