HPE FlexNetwork 10500 Series Network Management And Monitoring Command Reference page 20

Examples
# Display the path that the packets traverse from source to destination (2001:3::2).
<Sysname> tracert ipv6 2001:3::2
traceroute to 2001:3::2(2001:3::2), 30 hops at most, 60 byte packets, press CTRL_C to break
1 2001:1::2
2 2001:2::2 [AS 100]
3 2001:3::2 [AS 200]
# Display the path that the packets traverse from source to destination (2001:3::2) in VPN instance
vpn1, as well as the AS information of the hops along the path.
<Sysname> tracert ipv6 –vpn-instance vpn1 –resolve-as vpn 2001:3::2
traceroute to 2001:3::2(2001:3::2), 30 hops at most, 60 byte packets , press CTRL_C to
break
1 2001:1::2
2 2001:2::2
3 2001:3::2 [AS 65535]
Table 4 Command output
Field
traceroute to 2001:3::2
hops at most
byte packets
2 2001:2::2 [AS 100] 0.861 ms
0.718 ms 0.679 ms
0.661 ms 0.618 ms
0.861 ms
0.822 ms
0.661 ms 0.618 ms
0.861 ms 0.718 ms
0.822 ms
Description
Display the route that the IPv6 packets traverse from the current device
to the device whose IP address is 2001:3:2.
Maximum number of hops of the probe packets, which can be set by the
-m keyword.
Number of bytes of a probe packet.
Probe result of the probe packets that contain a hoplimit value of 2,
including the following information about the second hop:
•
•
•
The number of packets that can be sent in each probe can be set by
using the -q keyword.
0.579 ms
0.718 ms 0.679 ms
0.731 ms 0.708 ms
0.579 ms
0.679 ms
0.731 ms 0.708 ms
IPv6 address of the hop.
Number of the AS the hop belongs to. The AS number appears
only when it is found for the hop in the specified routing table.
The round-trip time of the probe packets.
11