Monitor Kernel Deadloop Action - HPE FlexNetwork 10500 Series Network Management And Monitoring Command Reference

Default
The default directory is the root directory of the flash: file system on the active MPU (in standalone
mode) or global active MPU (in IRF mode).
Views
User view
Predefined user roles
network-admin
mdc-admin
Parameters
directory: Specifies the directory for saving core files.
Usage guidelines
(In standalone mode.) The specified directory must be the root directory of a file system on the active
MPU.
(In IRF mode.) The specified directory must be the root directory of a file system on the global active
MPU.
You can use the command to change the directory if there are different types of storage media on the
device.
The system saves core files to the core directory in the specified directory. If the core directory does
not exist in the specified directory, the system creates the core directory before saving core files.
If no directory is specified or the specified directory is not accessible, the system cannot save core
files.
Examples
# Specify the directory for saving core files as flash:/.
<Sysname> exception filepath flash:/
Related commands
display exception filepath
process core

monitor kernel deadloop action

Use monitor kernel deadloop action to specify the action to be taken in response to a kernel
thread deadloop.
Use undo monitor kernel deadloop action to restore the default.
Syntax
In standalone mode:
monitor kernel deadloop action { reboot | record-only } [ slot slot-number [ cpu cpu-number ] ]
undo monitor kernel deadloop action [ slot slot-number [ cpu cpu-number ] ]
In IRF mode:
monitor kernel deadloop action { reboot | record-only } [ chassis chassis-number slot
slot-number [ cpu cpu-number ] ]
undo monitor kernel deadloop action [ chassis chassis-number slot slot-number [ cpu
cpu-number ] ]
265