Snmp-Agent Usm-User V3 User-Role - HPE FlexNetwork 10500 Series Network Management And Monitoring Command Reference

snmp-agent calculate-password
snmp-agent group
snmp-agent remote

snmp-agent usm-user v3 user-role

snmp-agent usm-user v3 user-role
Use snmp-agent usm-user v3 user-role to assign a user role to an SNMPv3 user created in RBAC
mode.
Use undo snmp-agent usm-user user-role to remove a user role.
Syntax
snmp-agent usm-user v3 user-name user-role role-name
undo snmp-agent usm-user v3 user-name user-role role-name
Default
An SNMPv3 user has the user role assigned to it at its creation.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
user-name: Specifies an SNMPv3 username, a case-sensitive string of 1 to 32 characters.
user-role role-name: Specifies a user role name, a case-sensitive string of 1 to 63 characters.
Usage guidelines
You can assign a maximum of 64 user roles to an SNMPv3 user.
An SNMPv3 user must have a minimum of one user role.
Examples
# Assign the user role network-admin to the SNMPv3 user testUser.
<Sysname> system-view
[Sysname] snmp-agent usm-user v3 testUser user-role network-admin
Related commands
snmp-agent usm-user v3
183