Display Diagnostic Event-Log; Display Diagnostic Ondemand Configuration - HPE FlexNetwork 10500 Series Network Management And Monitoring Command Reference

display diagnostic event-log

Use display diagnostic event-log to display GOLD log entries.
Syntax
display diagnostic event-log [ error | info ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
error: Displays all error log entries.
info: Displays all log entries except error log entries.
Usage guidelines
If you do not specify the error and info keywords, the command displays all GOLD log entries.
The system records information about test execution in the form of logs. A log entry contains test
name, execution time, test result, and failure cause. Log entries are generated for every execution.
To reduce the burden of the information center, GOLD logs are not sent to the information center.
(In standalone mode.) GOLD logs are cleared when the device restarts or when an active/standby
MPU switchover occurs.
(In IRF mode.) GOLD logs are cleared when the device restarts or when a global active/standby
MPU switchover occurs.
Examples
# (In standalone mode.) Display all GOLD log entries.
<Sysname> display diagnostic event-log
Event: E_INFO, Wed Jan
Result->Success.

display diagnostic ondemand configuration

Use display diagnostic ondemand configuration to display configurations of on-demand
diagnostic tests.
Syntax
display diagnostic ondemand configuration
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display the number of executions and the number of failed tests configured for on-demand
diagnostic tests.
7 11:39:53:314 2014, -Slot=1 TestName->IPCMonitor, Event_INFO:
388