HPE FlexNetwork 10500 Series Network Management And Monitoring Command Reference page 111
Hide thumbs
Also See for FlexNetwork 10500 Series:
- Security command reference (881 pages) ,
- Security configuration manual (702 pages) ,
- Configuration manual (407 pages)
Table of Contents
Advertisement
VPN instance: Not specified
Local mode: client, local poll interval: 6
Peer mode: server, peer poll interval: 6
Offset: 0.2862ms, roundtrip delay: 3.2653ms, dispersion: 4.5166ms
Root roundtrip delay: 0.0000ms, root dispersion: 10.910ms
Reachabilities:31, sync distance: 0.0194
Precision: 2^18, version: 3, source interface: Not specified
Reftime: d17cbba5.1473de1e
Orgtime: 00000000.00000000
Rcvtime: d17cbbc0.b1959a30
Xmttime: d17cbbc0.b1959a30
Roundtrip delay samples: 0.007 0.010 0.006 0.011 0.010 0.005 0.007 0.003
Offset samples: 5629.55 3913.76 5247.27 6526.92 31.99 148.72 38.27 0.29
Filter order: 7
Total sessions: 1
Table 18 Command output
Field
Clock source
Clock stratum
Clock status
Tue, May 17 2011
Thu, Feb
7 2036
Tue, May 17 2011
Tue, May 17 2011
5
2
6
0
Description
IP address of the NTP server. If this field displays 0.0.0.0, the IP
address of the NTP server has not been resolved successfully.
Stratum level of the NTP server, which determines the clock
accuracy. The value is in the range of 1 to 16. A lower stratum
level represents greater clock accuracy. A stratum 16 clock is not
synchronized and cannot be used as a reference clock.
Status of the clock source corresponding to this association:
•
configured—The association was created by a
configuration command.
•
dynamic—The association is established dynamically.
•
master—The clock source is the primary reference source
of the current system.
•
selected—The clock source has survived the clock selection
algorithm.
•
candidate—The clock source is the candidate reference
source.
•
sane—The clock source has passed authentication and will
be used as a reference clock.
•
insane—The clock source has not passed authentication, or
it has passed authentication but will not be used as a
reference clock.
•
valid—The clock source is valid, which means the clock
source meets the following requirements:
•
invalid—The clock source is invalid.
•
unsynced—The clock source has not been synchronized or
the value of the stratum level is invalid.
102
9:17:25.079
6:28:16.000
9:17:52.693
9:17:52.693
4
1
3
It has been authenticated and synchronized.
Its stratum level is valid.
Its root delay and root dispersion values are within their
ranges.
Advertisement
Table of Contents
