HPE FlexNetwork 10500 Series Network Management And Monitoring Command Reference page 335

Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
slot slot-number: Specifies a card by its slot number. If you do not specify a card, the command
displays IPv6 NetStream template information for the active MPU. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device or specifies a
PEX. The chassis-number argument represents the member ID of the IRF member device or the
virtual chassis number of the PEX. The slot-number argument represents the slot number of the card
or PEX. If you do not specify a card or PEX, this command displays IPv6 NetStream template
information for the global active MPU. (In IRF mode.)
Usage guidelines
IPv6 NetStream templates vary by aggregation mode. This command displays IPv6 NetStream
template information for all the configured aggregation modes.
Examples
# Display IPv6 NetStream template information.
<Sysname> display ipv6 netstream template
Flow template refresh frequency
Flow template refresh interval
Active flow templates
Created flow templates
Protocol-port outbound template:
Template ID
Field count
Field type
---------------------------------------------------------------------------
Flows
Out packets
Out bytes
First forwarded
Last forwarded
Protocol
IP protocol version
Direction
PAD
L4 source port
L4 destination port
Sampling algorithm
PAD
PAD
PAD
: 20
: 30 min
: 2
: 2
: 3258
: 14
Field length (bytes)
4
8
8
4
4
1
1
1
1
2
2
1
1
1
1
326