Display Rmon History - HPE FlexNetwork 10500 Series Network Management And Monitoring Command Reference

Related commands
rmon event

display rmon history

Use display rmon history to display RMON history control entries and history samples of Ethernet
statistics for Ethernet interfaces.
Syntax
display rmon history [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number. If you do not specify
an interface, the command displays history samples for all interfaces that have an RMON history
control entry.
Usage guidelines
RMON uses the etherHistoryTable object to store the history samples of Ethernet statistics for
Ethernet interfaces.
To collect history samples for an Ethernet interface, you must first create a history control entry on
the interface.
To configure the number of history samples that can be displayed and the history sampling interval,
use the rmon history command.
Examples
# Display the RMON history control entry and history samples for Ten-GigabitEthernet 1/0/1.
<Sysname> display rmon history ten-gigabitethernet 1/0/1
HistoryControlEntry 6 owned by user1 is VALID.
Sampled interface
Sampling interval
Sampling record 1 :
dropevents
packets
multicast packets : 23
undersize packets : 0
fragments
collisions
: Ten-GigabitEthernet1/0/1<ifIndex.117>
: 8(sec) with 3 buckets max
: 0 , octets
: 54 , broadcast packets
, CRC alignment errors : 0
, oversize packets
: 0 , jabbers
: 0 , utilization
188
: 5869
: 9
: 0
: 0
: 0