Reset Ip Netstream Statistics - HPE FlexNetwork 10500 Series Network Management And Monitoring Command Reference
Hide thumbs
Also See for FlexNetwork 10500 Series:
- Security command reference (881 pages) ,
- Security configuration manual (702 pages) ,
- Configuration manual (407 pages)
Table of Contents
Advertisement
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
seconds: Sets the aging timer for inactive flows, in the range of 10 to 320 seconds.
Usage guidelines
A flow is considered inactive if no packet for the NetStream entry arrives before the timer set by this
command expires.
Examples
# Set the aging timer to 60 seconds for inactive flows.
<Sysname> system-view
[Sysname] ip netstream timeout inactive 60
Related commands
ip netstream timeout active
reset ip netstream statistics
Use reset ip netstream statistics to age out all flows in the cache and export NetStream data.
Syntax
reset ip netstream statistics
Views
User view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
It takes the system several minutes to execute the command. During this period, the system does
not collect NetStream data.
Examples
# Age out and export all NetStream data.
<Sysname> reset ip netstream statistics
This process may take a few minutes.
Netstream statistic function is disabled during this process.
320
Advertisement
Table of Contents
