Display Snmp-Agent Remote - HPE FlexNetwork 10500 Series Network Management And Monitoring Command Reference

Subtree mask:
Storage-type: nonVolatile
View Type: excluded
View status: active
View name: ViewDefault
MIB Subtree: snmpModules.18
Subtree mask:
Storage-type: nonVolatile
View Type: excluded
View status: active
ViewDefault is the default MIB view. The output shows that except for the MIB objects in the
snmpUsmMIB, snmpVacmMIB, and snmpModules.18 subtrees, all the MIB objects in the iso
subtree are accessible.
Table 30 Command output
Field
View name
MIB Subtree
Subtree mask
Storage-type
View Type
View status
Related commands
snmp-agent mib-view

display snmp-agent remote

Use display snmp-agent remote to display engine IDs of the remote SNMP entities.
Syntax
display snmp-agent remote [ { ipv4-address | ipv6 ipv6-address } [ vpn-instance
vpn-instance-name ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Description
MIB view name.
MIB subtree covered by the MIB view.
MIB subtree mask.
Type of the medium (see
Access privilege for the MIB subtree in the MIB view:
•
Included—All objects in the MIB subtree are accessible in the MIB view.
•
Excluded—None of the objects in the MIB subtree is accessible in the MIB view.
Status of the MIB view:
•
active—MIB view is effective.
•
inactive—MIB view is ineffective. The objects in the MIB view are not accessible,
but they can send notifications.
Table 23) where the subtree view is stored.
147