Display Snmp-Agent Usm-User - HPE FlexNetwork 10500 Series Network Management And Monitoring Command Reference

mdc-operator
Usage guidelines
If a module has multiple sub-modules and SNMP notifications are enabled for one of its sub-modules,
the command output shows that the module is SNMP notifications-enabled.
To determine whether a module supports SNMP notifications, execute the snmp-agent trap enable ?
command.
The display snmp-agent trap-list command output varies by the snmp-agent trap enable
command configuration and the module configuration.
Examples
# Display SNMP notifications enabling status for modules.
<Sysname> display snmp-agent trap-list
arp notification is disabled.
configuration notification is enabled.
mac-address notification is enabled.
radius notification is disabled.
standard notification is enabled.
syslog notification is disabled.
system notification is enabled.
Enabled notifications: 4; Disabled notifications: 3
Related commands
snmp-agent trap enable

display snmp-agent usm-user

Use display snmp-agent usm-user to display SNMPv3 user information.
Syntax
display snmp-agent usm-user [ engineid engineid | group group-name | username user-name ] *
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
engineid engineid: Specifies an SNMP engine ID. The engine ID is case insensitive. When an
SNMPv3 user is created, the system records the local SNMP entity engine ID. The user becomes
invalid when the engine ID changes, and it becomes valid again when the recorded engine ID is
restored.
group group-name: Specifies an SNMP group by its name. The group name is case sensitive.
username user-name: Specifies an SNMPv3 user by its name. The username is case sensitive.
152