Community Read - HPE FlexNetwork 10500 Series Network Management And Monitoring Command Reference

Default
The codec type for the voice operation is G.711 A-law.
Views
Voice operation view
Predefined user roles
network-admin
mdc-admin
Parameters
g711a: Specifies G.711 A-law codec type.
g711u: Specifies G.711 µ-law codec type
g729a: Specifies G.729 A-law codec type.
Examples
# Set the codec type to g729a for the voice operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type voice
[Sysname-nqa-admin-test-voice] codec-type g729a

community read

Use community read to specify the community name for the SNMP operation.
Use undo community read to restore the default.
Syntax
community read { cipher | simple } community-name
undo community read
Default
The SNMP operation uses the community name public.
Views
SNMP operation view
Predefined user roles
network-admin
mdc-admin
Parameters
cipher: Specifies a community name in encrypted form.
simple: Specifies a community name in plaintext form. For security purposes, the community name
specified in plaintext form will be stored in encrypted form.
community-name: Specifies the community name. Its plaintext form is a case-sensitive string of 1 to
32 characters. Its encrypted form is a case-sensitive string of 33 to 73 characters.
Usage guidelines
You must specify the community name for the SNMP operation when both of the following conditions
exist:
13