Display Diagnostic Result Statistics - HPE FlexNetwork 10500 Series Network Management And Monitoring Command Reference

Last execution time
First failure time
Last failure time
Last pass time
Last execution result
Last failure reason
Next execution time
test result: pass
Test name
Total run count
Total failure count
Consecutive failure count: 0
Last execution time
First failure time
Last failure time
Last pass time
Last execution result
Last failure reason
Next execution time
test result: pass
Table 83 Command output
Field
Test name
Total run count
Total failure count
Consecutive failure
count
Last execution time
First failure time
Last failure time
Last pass time
Last execution result
Last failure reason
Next execution time

display diagnostic result statistics

Use display diagnostic result statistics to display statistics for packet-related diagnostic tests.
Syntax
In standalone mode:
: Fri Nov 21 23:13:35 2014
: -NA-
: -NA-
: Fri Nov 21 23:13:35 2014
: Success
: -NA-
: Fri Nov 21 23:13:45 2014
: ComponentMonitor
: 104
: 0
: Fri Nov 21 23:13:25 2014
: -NA-
: -NA-
: Fri Nov 21 23:13:25 2014
: Success
: -NA-
: Fri Nov 21 23:13:55 2014
Description
Name of the test.
Total number of executions.
Total number of failed tests.
Number of consecutive failed tests.
Most recent execution time.
First failed test time. If no failure occurs, –NA– is displayed.
Most recent failed test time. If no failure occurs, –NA– is displayed.
Most recent success test time. If no success occurs, –NA– is displayed.
Most recent test result.
Cause for the most recent failed test. If the failed test is simulated, Simulated
Test is displayed. If no failure occurs, –NA– is displayed.
Time for the next execution. If the test is a monitoring test, its next execution time
is the most recent execution time plus the execution interval. If the test is an
on-demand or boot-up test, –NA– is displayed.
391