HPE FlexNetwork 10500 Series Network Management And Monitoring Command Reference page 252

Syntax
In standalone mode:
display kernel deadloop configuration [ slot slot-number [ cpu cpu-number ] ]
In IRF mode:
display kernel deadloop configuration [ chassis chassis-number slot slot-number [ cpu
cpu-number ] ]
Views
Any view
Predefined user roles
network-admin
mdc-admin
Parameters
slot slot-number: Specifies an MPU by its slot number. If you do not specify this option, the
command displays kernel thread deadloop detection configuration for the active MPU. (In
standalone mode.)
chassis chassis-number slot slot-number: Specifies an MPU on an IRF member device. If you do
not specify this option, the command displays kernel thread deadloop detection configuration for the
global active MPU. (In IRF mode.)
cpu cpu-number: Specifies a CPU by its number.
Examples
# Display kernel thread deadloop detection configuration.
<Sysname> display kernel deadloop configuration
Thread dead loop detection: Disabled
Dead loop timer (in seconds): 60
Dead loop core list: 0-1
Dead loop action: Record-only
Threads excluded from monitoring: 1
TID:
Table 53 Command output
Field
Dead loop timer (in seconds): n
Dead loop core list
Dead loop action
Threads excluded from monitoring
Name
TID
No thread is excluded from
monitoring
15 Name: co0
Description
Time interval (in seconds) to identify a kernel thread deadloop. A
kernel thread deadloop occurs if a kernel thread runs more than n
seconds.
CPU cores for which kernel thread deadloop detection is performed.
Action to be taken in response to a kernel thread deadloop:
•
Reboot—Logs the event and reboots the hardware.
•
Record-only—Logs the event.
Kernel threads excluded from kernel thread deadloop detection. This
field appears only if the monitor kernel deadloop exclude-thread
command is configured.
Kernel thread name.
Kernel thread number.
All kernel threads are monitored by kernel thread deadloop detection.
243