Ipv6 Netstream Timeout Inactive - HPE FlexNetwork 10500 Series Network Management And Monitoring Command Reference
Hide thumbs
Also See for FlexNetwork 10500 Series:
- Security command reference (881 pages) ,
- Security configuration manual (702 pages) ,
- Configuration manual (407 pages)
Table of Contents
Advertisement
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
minutes: Sets the aging timer for active flows, in the range of 1 to 5 minutes.
Usage guidelines
A flow is considered active if packets for the IPv6 NetStream entry arrive before the timer set by this
command expires.
Examples
# Set the aging timer to 5 minutes for active flows.
<Sysname> system-view
[Sysname] ipv6 netstream timeout active 5
Related commands
ipv6 netstream timeout inactive
ipv6 netstream timeout inactive
Use ipv6 netstream timeout inactive to set the aging timer for inactive flows.
Use undo ipv6 netstream timeout inactive to restore the default.
Syntax
ipv6 netstream timeout inactive seconds
undo ipv6 netstream timeout inactive
Default
The aging timer is 300 seconds for inactive flows.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
seconds: Sets the aging timer for inactive flows, in the range of 10 to 320 seconds.
Usage guidelines
A flow is considered inactive if no packet for the IPv6 NetStream entry arrives before the timer set by
this command expires.
Examples
# Set the aging timer to 60 seconds for inactive flows.
<Sysname> system-view
[Sysname] ipv6 netstream timeout inactive 60
337
Advertisement
Table of Contents
