Expect Data - HPE FlexNetwork 10500 Series Network Management And Monitoring Command Reference

Table 13 Monitored performance metrics for ICMP jitter/UDP jitter/voice operations
Monitored
performance
metric
RTT
jitter-DS/jitter-SD
OWD-DS/OWD-SD
packet-loss
ICPIF/MOS
(available only for
the voice operation)
Related commands
statistics interval

expect data

Use expect data to configure the expected data.
Use undo expect data to restore the default.
Syntax
expect data expression [ offset number ]
undo expect data
Default
No expected data is configured.
Views
HTTP/HTTPS/TCP/UDP template view
Predefined user roles
network-admin
mdc-admin
Parameters
expression: Specifies the expected data, a case-sensitive string of 1 to 200 characters.
offset number: Specifies the offset in bytes after which the first match operation starts. The value
range for the number argument is 0 to 1000, and the default value is 0. If you do not specify an offset,
the match operation starts from the beginning byte of the payload.
Threshold
Collect data in
type
Packets sent in
accumulate the counting
interval.
average N/A
Packets sent in
accumulate the counting
interval.
average N/A
Packets sent in
N/A the counting
interval.
Packets sent in
accumulate the counting
interval.
N/A N/A
39
Checked Num Over-threshold Num
Number of packets of
Number of sent
which the round-trip time
packets.
exceeds the threshold.
N/A N/A
Number of packets of
Number of sent
which the one-way jitter
packets.
exceeds the threshold.
N/A N/A
Number of packets of
Number of sent
which the one-way delay
packets.
exceeds the threshold.
Number of sent
Number of packet loss.
packets.
N/A N/A