HPE FlexNetwork 10500 Series Network Management And Monitoring Command Reference page 103

mdc-admin
Parameters
ip-address: Specifies the IP address for the UDP listening service.
port-number: Specifies the port number for the UDP listening service, in the range of 1 to 65535.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a
case-sensitive string of 1 to 31 characters. If you do not specify this option, the NQA server listens on
a public IP address.
tos tos: Specifies the ToS value in the IP header for reply packets. The value range for this argument
is 0 to 255, and the default value is 0.
Usage guidelines
Use this command on the NQA server only for the UDP jitter, UDP echo, and voice operations.
When you configure the IP address and port number for a UDP listening service on the NQA server,
follow these restrictions and guidelines:
•
The IP address, port number, and VPN instance must be unique on the NQA server and match
the configuration on the NQA client.
•
The IP address must be the address of an interface on the NQA server.
•
To ensure successful NQA operations and avoid affecting existing services, do not configure
the UDP listening service on well-known ports from 1 to 1023.
Examples
# Configure a UDP listening service to enable the NQA server to listen to port 9000 on the IP address
169.254.10.2.
<Sysname> system-view
[Sysname] nqa server udp-echo 169.254.10.2 9000
Related commands
display nqa server
nqa server enable
94