Resolve-Target - HPE FlexNetwork 10500 Series Network Management And Monitoring Command Reference

Default
The NQA client notifies the feature of the successful operation event if the number of consecutive
successful probes reaches 3.
Views
Any NQA template view
Predefined user roles
network-admin
mdc-admin
Parameters
count: Specifies the number of consecutive successful probes, in the range of 1 to 15.
Usage guidelines
If number of consecutive successful probes is reached, the NQA client notifies the feature that uses
the template of the successful operation event.
If you execute this command and the reaction trigger per-probe command multiple times, the most
configuration takes effect.
Examples
# In HTTP template view, configure the NQA client to notify the feature of the successful operation
event if the number of consecutive successful probes reaches 5.
<Sysname> system-view
[Sysname] nqa template http httptplt
[Sysname-nqatplt-http-httptplt] reaction trigger probe-pass 5
Related commands
reaction trigger per-probe
reaction trigger probe-fail

resolve-target

Use resolve-target to specify the domain name to be resolved in the DNS operation.
Use undo resolve-target to restore the default.
Syntax
resolve-target domain-name
undo resolve-target
Default
The domain name to be resolved in the DNS operation is not specified.
Views
DNS operation view
DNS template view
Predefined user roles
network-admin
mdc-admin
76