Operation (Http/Https Operation View) - HPE FlexNetwork 10500 Series Network Management And Monitoring Command Reference

Usage guidelines
When you perform the put operation with the filename command configured, make sure the file
exists on the NQA client.
If you get a file from the FTP server, make sure the file specified in the URL exists on the FTP server.
The NQA client does not save the file obtained from the FTP server.
Use a small file for the FTP operation. A big file might result in transfer failure because of timeout, or
might affect other services for occupying much network bandwidth.
Examples
# Set the operation type to put for the FTP operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type ftp
[Sysname-nqa-admin-test-ftp] operation put
# In FTP template view, set the operation type to put for the FTP operation.
<Sysname> system-view
[Sysname] nqa template ftp ftptplt
[Sysname-nqatplt-ftp-ftptplt] operation put
Related commands
password
username

operation (HTTP/HTTPS operation view)

Use operation to specify the operation type for the HTTP or HTTPS operation.
Use undo operation to restore the default.
Syntax
operation { get | post | raw }
undo operation
Default
The HTTP or HTTPS operation type is get.
Views
HTTP operation view
HTTP/HTTPS template view
Predefined user roles
network-admin
mdc-admin
Parameters
get: Gets data from the HTTP or HTTPS server.
post: Transfers data to the HTTP or HTTPS server.
raw: Sends the RAW request to the HTTP or HTTPS server.
Usage guidelines
The HTTP and HTTPS operations use HTTP and HTTPS requests as probe packets.
55