Snmp-Agent Local-Engineid - HPE FlexNetwork 10500 Series Network Management And Monitoring Command Reference

Security model
Authentication without
privacy
No authentication, no
privacy
You can specify an ACL for the user and group, respectively, to filter illegitimate NMSs. Only the
NMSs permitted by the ACLs for both the user and group can access the SNMP agent. The following
rules apply to the ACLs for the user and group:
•
If you do not specify an ACL, the specified ACL does not exist, or the specified ACL does not
have any rules, all NMSs that use the username can access the SNMP agent.
•
If you have specified an ACL and the ACL has rules, only the NMSs permitted by the ACL can
access the agent.
For more information about ACL, see ACL and QoS Configuration Guide.
Examples
# Create the SNMPv3 group group1.
<Sysname> system-view
[Sysname] snmp-agent group v3 group1
Related commands
display snmp-agent group
snmp-agent mib-view
snmp-agent usm-user

snmp-agent local-engineid

Use snmp-agent local-engineid to set an SNMP engine ID.
Use undo snmp-agent local-engineid to restore the default.
Syntax
snmp-agent local-engineid engineid
undo snmp-agent local-engineid
Default
The engine ID of a device is the combination of the company ID and the device ID. The device ID
varies by device model.
Views
System view
Predefined user roles
network-admin
mdc-admin
Security model
keyword for the
group
authentication
Neither authentication
nor privacy
164
Security key
settings for the
user
Authentication key
None
Remarks
If no authentication key is
configured, SNMP
communication will fail.
The encryption key (if
any) for the user does not
take effect.
The authentication and
encryption keys, if
configured, do not take
effect.