History-Record Enable; History-Record Keep-Time - HPE FlexNetwork 10500 Series Network Management And Monitoring Command Reference

history-record enable

Use history-record enable to enable the saving of history records for the NQA operation.
Use undo history-record enable to disable the saving of history records.
Syntax
history-record enable
undo history-record enable
Default
The saving of history records is enabled only for the UDP tracert operation.
Views
ICMP echo/TCP/UDP echo operation view
DHCP/DLSw/DNS/FTP/HTTP/SNMP operation view
UDP tracert operation view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
To display the history records of the NQA operation, use the display nqa history command.
The undo form of the command also removes existing history records of an NQA operation.
Examples
# Enable the saving of history records for the NQA operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] history-record enable
Related commands
display nqa history

history-record keep-time

Use history-record keep-time to set the lifetime of history records for an NQA operation.
Use undo history-record keep-time to restore the default.
Syntax
history-record keep-time keep-time
undo history-record keep-time
Default
The history records of an NQA operation are kept for 120 minutes.
Views
ICMP echo/TCP/UDP echo operation view
DHCP/DLSw/DNS/FTP/HTTP/SNMP operation view
44