HPE FlexNetwork 10500 Series Network Management And Monitoring Command Reference page 198

Table 39 Command output
Field
HistoryControlEntry
entry-number owned by
owner is status.
Sampled Interface
Sampling interval
buckets max
Sampling record
dropevents
octets
packets
broadcast packets
multicast packets
CRC alignment errors
undersize packets
oversize packets
fragments
jabbers
collisions
utilization
Description
Status and owner of the history control entry:
•
entry-number—History control entry index.
•
owner—Entry owner.
•
status—Entry status:
VALID—The entry is valid.

UNDERCREATION—The entry is invalid.

The status field is not configurable at the CLI. All history control entries created
from the CLI are valid by default.
The display rmon history command can display invalid entries, but the
display current-configuration and display this commands do not display
their settings.
Sampled interface.
Sampling interval in seconds.
Maximum number of samples that can be saved for the history control entry.
If the expected bucket size specified with the rmon history command exceeds
the available history table size, RMON sets the bucket size as closely to the
expected bucket size as possible.
If the bucket has been full, RMON overwrites the oldest sample with the new
sample.
History sample index.
Total number of events in which packets were dropped during the sampling
interval.
NOTE:
This statistic is the number of times that a drop condition occurred. It is not
necessarily the total number of dropped packets.
Total number of octets received during the sampling interval.
Total number of packets (including bad packets) received during the sampling
interval.
Number of broadcast packets received during the sampling interval.
Number of multicast packets received during the sampling interval.
Number of packets received with CRC alignment errors during the sampling
interval.
Number of undersize packets received during the sampling interval.
Undersize packets are shorter than 64 octets (excluding framing bits but
including FCS octets).
Number of oversize packets received during the sampling interval.
Oversize packets are longer than 1518 octets (excluding framing bits but
including FCS octets).
Number of undersize packets with CRC errors received during the sampling
interval.
Number of oversize packets with CRC errors received during the sampling
interval.
Number of colliding packets received during the sampling interval.
Bandwidth utilization (in hundreds of a percent) during the sampling period.
189