Ipv6 Netstream Export Version - HPE FlexNetwork 10500 Series Network Management And Monitoring Command Reference

Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
packet packets: Specifies the number of packets that are sent before the template is sent. The value
range is 1 to 600.
time minutes: Specifies the interval at which the template is sent, in the range of 1 to 3600 minutes.
Usage guidelines
Version 9 and version 10 are template-based and support user-defined formats. An IPv6 NetStream
device must send the version 9 or version 10 template to NetStream servers regularly, because the
servers do not permanently save templates.
The refresh rate can be packet count-based or time-based. If both settings are configured, the
template is sent when either of the conditions is met.
Examples
# Configure the device to send the IPv6 NetStream version 9 or version 10 template every 100
packets.
<Sysname> system-view
[Sysname] ipv6 netstream export template refresh-rate packet 100

ipv6 netstream export version

Use ipv6 netstream export version 9 to export IPv6 NetStream data in the version 9 format and
choose whether to record AS and BGP next hop information.
Use ipv6 netstream export version 10 to export IPv6 NetStream data in the version 10 format and
choose whether to record AS and BGP next hop information.
Use undo ipv6 netstream export version to restore the default.
Syntax
ipv6 netstream export version { 9 | 10 } { origin-as | peer-as } [ bgp-nexthop ]
undo ipv6 netstream export version
Default
The version 9 format is used to export IPv6 NetStream data.
The peer AS numbers are recorded. The BGP next hop is not recorded.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
origin-as: Records the source AS of the source address and the destination AS of the destination
address.
334