Display Diagnostic Content - HPE FlexNetwork 10500 Series Network Management And Monitoring Command Reference

slot slot-number-list: Specifies a space-separated list of up to seven slot number items. An item
specifies a card or a PEX by its slot number or specifies a range of cards or PEXs in the form of
start-slot-number to end-slot-number. The end slot number must be equal to or greater than the start
slot number. (In IRF mode.)
test-name: Specifies a test by its name, a case-sensitive character string. You can use the test ?
command to verify the value range of the test name.
failure: Configures the system to generate failure results.
random-failure: Configures the system to randomly generate results.
success: Configures the system to generate success results.
Usage guidelines
Test simulation is used to verify GOLD frame functionality. After you execute this command, the
system simulates the specified test if the execution requirements for the test are met. The test is not
actually executed and does not trigger hardware correcting actions.
This command only applies to monitoring diagnostic tests and on-demand diagnostic tests.
Examples
# (In standalone mode.) Simulate test BoardStatusMonitor as failed on the specified slot.
<Sysname> diagnostic simulation slot 1 test BoardStatusMonitor failure
Related commands
display diagnostic simulation

display diagnostic content

Use display diagnostic content to display information about diagnostic tests.
Syntax
In standalone mode:
display diagnostic content [ slot slot-number ] [ verbose ]
In IRF mode:
display diagnostic content [ chassis chassis-number [ slot slot-number ] ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies a card by its slot number. If you do not specify this option, the command
applies to all cards. (In standalone mode.)
chassis chassis-number: Specifies an IRF member device by its member ID or specifies a PEX by
its virtual chassis number. On an IRF fabric, the command applies to all member devices if you do
not specify a member device. On an eIRF system, the command applies to all IRF member devices
and PEXs if you do not specify a member device or PEX. (In IRF mode.)
slot slot-number: Specifies a card or a PEX by its slot number. On an IRF fabric, the command
applies to all cards if you do not specify a card. On an eIRF system, the command applies to all cards
and PEXs if you do not specify a card or PEX. (In IRF mode.)
385