Monitor Kernel Deadloop Enable - HPE FlexNetwork 10500 Series Network Management And Monitoring Command Reference

Default
The system logs the kernel thread deadloop event.
Views
System view
Predefined user roles
network-admin
Parameters
reboot: Logs the event and reboots the specified slot or CPU.
record-only: Logs the event.
slot slot-number: Specifies a card by its slot number. If you do not specify this option, the command
specifies the action for the active MPU. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. If you do not specify a card, this command
specifies the action for the global active MPU. (In IRF mode.)
cpu cpu-number: Specifies a CPU by its number.
Usage guidelines
Inappropriate use of this command can cause service problems or system breakdown. A good
practice is not to use this command. If you still want to use this command, make sure you understand
the impact of the command on your network before you use it.
Examples
# Set the kernel thread deadloop protection action to reboot for slot 1. (In standalone mode.)
<Sysname> system-view
[Sysname] monitor kernel deadloop action reboot slot 1
Related commands
display kernel deadloop configuration

monitor kernel deadloop enable

monitor kernel deadloop enable
Use monitor kernel deadloop enable to enable kernel thread deadloop detection.
Use undo monitor kernel deadloop enable to disable kernel thread deadloop detection.
Syntax
In standalone mode:
monitor kernel
core-number&<1-64> ] ] ]
undo monitor kernel deadloop enable [ slot slot-number [ cpu cpu-number ] ]
In IRF mode:
monitor kernel deadloop enable [ chassis chassis-number slot slot-number [ cpu cpu-number
[ core core-number&<1-64> ] ] ]
undo monitor kernel deadloop enable [ chassis chassis-number slot slot-number [ cpu
cpu-number ] ]
deadloop enable [ slot slot-number
266
[ cpu cpu-number [ core