Fuel Selector Valve And Filter; Removal Of Fuel Selector Valve And Filter - Piper Cherokee Six Service Manual

Table of Contents

Advertisement

8-17. FUEL SELECTOR VALVE AND FILTER.
8-18. FUEL SELECTOR VALVE OPERATION. When the fuel selector handle is not in a
positive selector detent position, more than one fuel port will be open at the same time. It
should be ascertained that the fuel selector is positioned in a detent, which can be easily felt
when moving the handle through its various positions.
8-19. REMOVAL OF FUEL SELECTOR VALVE AND FILTER.
a. Drain fuel from tanks. (Refer to Draining Fuel System, Section II.)
b. Remove center seats, seat belt attachments and floor panel just aft of the main spar
by removing the floor attachment screws. Lift the panel and remove.
c. Remove plate from bottom of the fuselage which covers fuel selector.
d. Disconnect the fuel lines and selector linkage from valve assembly.
e. Remove the four mounting screws which hold the fuel selector in place and remove
the selector assembly.
A960
I.
FILTER
2.
SPRING
METALLIC FILTER ASSEMBLY
3.
RETAINER
WASHER
NYLON FILTER ASSEMBLY
4.
BOWL
Figure 8-6. Fuel Filter
FUEL SYSTEM
Revised: 7/28/75
PIPER CHEROKEE SIX SERVICE MANUAL
2J6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents