Piper Cherokee Six Service Manual page 581

PIPER CHEROKEE SIX SERVICE MANUAL
NOTE
If a solderless terminal on an aluminum cable is loose, corroded
or otherwise unsatisfactory, it is recommended that the com-
plete cable assembly be replaced instead of replacing or repair-
ing the solderless terminal.
Should replacement of the complete assembly not be prac-
tical, it is permissible to replace the aluminum cable assembly
with a copper cable assembly which is two sizes smaller (ex.: An
AL-1 aluminum cable assembly is replaced with an AN-3 cop-
per cable assembly).
The new cable should be installed in accordance with AC-43-
13-2A.
THIS SPACE INTENTIONALLY LEFT BLANK
Added: 12/15/80
ELECTRICAL SYSTEM
3C5