Rudder Trim Control - Piper Cherokee Six Service Manual

PIPER CHEROKEE SIX SERVICE MANUAL
TABLE V-III. TROUBLESHOOTING CHART (SURFACE CONTROLS) (cont.)
Trouble Cause
Remedy
RUDDER CONTROL SYSTEM (cont.)
Excessive resistance
to rudder pedal
movement. (cont.)
Pulleys binding or
rubbing.
Replace binding pulleys
and/or provide clearance
between pulleys and
brackets.
Cables not in place on
pulleys.
Cables crossed or
routed incorrectly.
Install cables cor-
rectly. Check cable
guards.
Check routing of control
cables.
Rudder pedals not
neutral when rudder
is streamlined.
Incorrect rudder
travel.
Rudder cables
incorrectly rigged.
Rudder bellcrank stop
incorrectly adjusted.
Rig in accordance with
paragraph 5-28.
Rig in accordance with
paragraph 5-28.
Nose wheel contacts
stops before rudder.
Rig in accordance with
paragraph 5-28.
RUDDER TRIM CONTROL SYSTEM
Trim control knob
moves with excessive
resistance.
System not lubricated
properly.
Lubricate system.
SURFACE CONTROLS
Added: 8/7/74
1118