Parameter Differences For Models Cimr-A4A0930 And 4A1200 - YASKAWA A1000 Technical Manual

B.2 Parameter Groups
 Parameter Differences for models CIMR-A4A0930 and 4A1200
Parameter Group
A1 Initialization Parameters
b1 Operation Mode Selection
b2 DC Injection Braking and Short Circuit Braking
b3 Speed Search
b4 Timer Function
b5 PID Control
b8 Energy Saving
C3 Slip Compensation
C5 Automatic Speed Regulator (ASR)
C6 Carrier Frequency
E2 Motor 1 Parameters
E4 Motor 2 Parameters
E5 PM Motor Settings
F1 PG Speed Control Card (PG-B3/PG-X3/PG-RT3/PG-F3) F1-50 to F1-53 are not available in models CIMR-A4A0930 and 4A1200.
H2 Multi-Function Digital Outputs
H3 Multi-Function Analog Inputs
H5 MEMOBUS/Modbus Serial Communication
L1 Motor Protection
L3 Stall Prevention
L8 Drive Protection
L9 Drive Protection 2
n8 PM Motor Control Tuning
T1 Induction Motor Auto-Tuning
T2 PM Motor Auto-Tuning
U1 Operation Status Monitors
U2 Fault Trace
U4 Maintenance Monitors
452
Name
The setting range of A1-00 is 0 to 7. Refer to
b1-21 is not available in models CIMR-A4A0930 and 4A1200.
b2-02, b2-03, and b2-04 are not available for OLV/PM in models CIMR-A4A0930 and 4A1200.
• b3-04 is available in V/f and OLV. Refer to
• b3-07, b3-12, and b3-26 are available in models CIMR-A4A0930 and 4A1200.
• b3-29 and b3-33 are not available in models CIMR-A4A0930 and 4A1200.
b4-03 to b4-08 are not available in models CIMR-A4A0930 and 4A1200.
The setting range of b5-01 is 0 to 4.
b8-27 is not available in models CIMR-A4A0930 and 4A1200.
• C3-05 is available in OLV, CLV, AOLV/PM, or CLV/PM (A1-02 = 2, 3, 6, 7). Refer to
Compensation on page 462
• C3-16 to C3-18 are available in models CIMR-A4A0930 and 4A1200.
C5-39 is not available in models CIMR-A4A0930 and 4A1200.
• The setting range of C6-02 is 1, 2, or F.
• The setting range of C6-03 and C6-04 is 1.0 to 5.0 Hz. Refer to
details.
• C6-09 is not available in models CIMR-A4A0930 and 4A1200.
For E2-05, the setting unit is m and the setting range is 0.000 m to 65.000 m. Refer to
Parameters on page 470
For E4-05, the setting unit is m and the setting range is 0.000 m to 65.000 m. Refer to
Parameters on page 472
E5-25 is available in OLV/PM, AOLV/PM, or CLV/PM (A1-02 = 5, 6, 7). Refer to
Settings on page
• H2-07 to H2-10 are not available in models CIMR-A4A0930 and 4A1200.
• H2- cannot be set to D, 4E, 4F, 62, or 63.
H3- = 17 is available in models CIMR-A4A0930 and 4A1200.
H5-18 are not available in models CIMR-A4A0930 and 4A1200.
• L1-08 and L1-09 are not available in models CIMR-A4A0930 and 4A1200.
• L1-15 to L1-20 are available in models CIMR-A4A0930 and 4A1200.
• L3-04 cannot be set to 3.
• L3-34 and L3-35 are not available in models CIMR-A4A0930 and 4A1200.
• L8-01 and L8-55 are not available.
• The setting range of L8-29 is 0 or 1.
• L8-78 is available.
L9-03 is not available in models CIMR-A4A0930 and 4A1200.
• n8-03, n8-04, n8-11 to n8-21, n8-36 to n8-39, and n8-72 are not available in models CIMR-A4A0930
and 4A1200.
• n8-02 is not available in CLV/PM control mode in models CIMR-A4A0930 and 4A1200.
The setting range of T1-01 is 0 to 4, 8, or 9.
The setting range of T2-01 is 0 to 11.
• The setting units of U1-03 is 1 A. Refer to
• U1-29 is available in models CIMR-A4A0930 and 4A1200.
• The setting units of U2-05 is 1 A. Refer to
• U2-27 and U2-28 are available in models CIMR-A4A0930 and 4A1200.
• The setting units of U4-13 is 1 A. Refer to
• U4-32, U4-37, U4-38, and U4-39 are available in models CIMR-A4A0930 and 4A1200.
YASKAWA ELECTRIC SIEP C710616 27G YASKAWA AC Drive A1000 Technical Manual
Difference
A1: Initialization Parameters on page
b3: Speed Search on page 456
for details.
for details.
for details.
473.
U1: Operation Status Monitors on page 510
U2: Fault Trace on page 512
U4: Maintenance Monitors on page 514
453.
for details.
C3: Slip
C6: Carrier Frequency on page 465 for
E2: Motor 1
E4: Motor 2
E5: PM Motor
for details.
for details.
for details.