YASKAWA A1000 Technical Manual page 480

B.3 Parameter Table

F7: Communication Option Card (SI-EM3 and SI-EN3)
F7-01 through F7-42 are common settings used for Modbus TCP/IP, and Ethernet/IP option cards. Other parameters in
the F7 group are used for communication protocol specific settings.
For more details on a specific option card, refer to the instruction manual for the option card.
No.(Addr.) Name
F7-01
(3E5H)
IP Address 1
<44> <45>
<46>
F7-02
(3E6H)
IP Address 2
<44> <45>
<46>
F7-03
(3E7H)
IP Address 3
<44> <45>
<46>
F7-04
(3E8H)
IP Address 4
<44> <45>
<46>
F7-05
(3E9H) Subnet Mask 1
<46>
F7-06
(3EAH) Subnet Mask 2
<46>
F7-07
(3EBH) Subnet Mask 3
<46>
F7-08
(3ECH) Subnet Mask 4
<46>
F7-09
(3EDH) Gateway Address 1
<46>
F7-10
(3EEH) Gateway Address 2
<46>
F7-11
(3EFH) Gateway Address 3
<46>
F7-12
(3F0H) Gateway Address 4
<46>
F7-13
Address Mode at Startup
(3F1H)
F7-14
Duplex Mode Selection
(3F2H)
F7-15
(3F3H) Communication Speed Selection
<47>
F7-16
Communication Loss Time Out
(3F4H)
480
All Modes
Sets the static/fixed IP address.
Parameter F7-01 sets the most significant octet.
All Modes
Sets the static/fixed IP address.
Parameter F7-02 sets the second most significant octet.
All Modes
Sets the static/fixed IP address.
Parameter F7-03 sets the third most significant octet.
All Modes
Sets the static/fixed IP address.
Parameter F7-04 sets the fourth most significant octet.
All Modes
Sets the static/fixed Subnet Mask.
Parameter F7-05 sets the most significant octet.
All Modes
Sets the static/fixed Subnet Mask.
Parameter F7-06 sets the second most significant octet.
All Modes
Sets the static/fixed Subnet Mask.
Parameter F7-07 sets the third most significant octet.
All Modes
Sets the static/fixed Subnet Mask.
Parameter F7-08 sets the fourth most significant octet.
All Modes
Sets the static/fixed Gateway address.
Parameter F7-09 sets the most significant octet.
All Modes
Sets the static/fixed Gateway address.
Parameter F7-10 sets the second most significant octet.
All Modes
Sets the static/fixed Gateway address.
Parameter F7-11 sets the third most significant octet.
All Modes
Sets the static/fixed Gateway address.
Parameter F7-12 sets the fourth most significant octet.
All Modes
Selects how the option address is set.
0: Static
<45>
1: BOOTP
2: DHCP
All Modes
Selects duplex mode setting.
0: Half duplex forced
1: Auto-negotiate duplex mode and communication speed
2: Full duplex forced
3: Half duplex forced (port 1)/Auto-negotiate duplex mode and communication speed (port 2)
4: Half duplex forced (port 1)/Full duplex forced (port 2)
5: Auto-negotiate duplex mode and communication speed (port 1)/Half duplex forced (port 2)
6: Auto-negotiate duplex mode and communication speed (port 1)/Full duplex forced (port 2)
7: Full duplex forced (port 1)/Half duplex forced (port 2)
8: Full duplex forced (port 1)/Auto-negotiate duplex mode and communication speed (port 2)
All Modes
Sets the communication speed.
10: 10 Mbps
100: 100 Mbps
101: 10 Mbps (port 1)/100 Mbps (port 2)
102: 100 Mbps (port 1)/10 Mbps (port 2)
All Modes
Sets the time-out value for communication loss detection in tenths of a second. A value of 0
disables the connection time-out.
Example: An entered value of 100 represents 10.0 seconds.
YASKAWA ELECTRIC SIEP C710616 27G YASKAWA AC Drive A1000 Technical Manual
Description Setting Page
Default: 192
Min: 0 –
Max: 255
Default: 168
Min: 0 –
Max: 255
Default: 1
Min: 0 –
Max: 255
Default: 20
Min: 0 –
Max: 255
Default: 255
Min: 0 –
Max: 255
Default: 255
Min: 0 –
Max: 255
Default: 255
Min: 0 –
Max: 255
Default: 0
Min: 0 –
Max: 255
Default: 192
Min: 0 –
Max: 255
Default: 168
Min: 0 –
Max: 255
Default: 1
Min: 0 –
Max: 255
Default: 1
Min: 0 –
Max: 255
Default: 2
Min: 0 –
Max: 2
Default: 1
Min: 0 –
Max: 8
Default: 10
Min: 10 –
Max: 102
Default: 0.0 s
Min: 0.0 s 233
Max: 30.0 s