Interacoustics AA222 Instructions For Use Manual page 48

AA222 Instructions for Use – EN
Speech – Mic
The screen for speech using the microphone is the same as described above. The screen appears by
pressing the hardkey Mic (27). Hold down the Mic (27) button to adjust the live voice. Adjust the levels until
you reach an average of approximately 0 dB VU on the VU meter.
NOTICE
If the speech and calibration signal are not at the same level, this must be manually corrected.
Speech – CD
The screen for speech using an external speech input "speech CD" is the same as described above. The
input for speech must be set to CD in the speech settings.
3.7.1.5 Speech – CH2On
This test screen is the same as for speech. When in Speech – Ch2On, the speech material is presented
binaurally.
3.7.1.6 Speech in noise
This test screen is the same as for speech. When in Speech in noise, the speech material and speech in
noise is presented in the same ear.
M Play
Resume
Pause
N Manual forward
Pressing shift with this button will allow for manual reverse.
O Stop playing the wave files.
When the word-list is completed or another track is to be selected, use the End F-
button to leave the recording mode.
P Use the numbers during phonetic scoring to indicate the number of phonemes in
the word with the correct response.
Page 44