AA222 Instructions for Use – EN
2.4.1 Changing probe system
Change between the standard and clinical probe as follows:
2.4.2 Safety precautions to take when connecting the AA222
WARNING
Please note that if connections are made to standard equipment such as printers and networks, special
precautions must be taken in order to maintain medical safety. Please refer to section 2.3.
WARNING
Use only specified power supply unit UE60-240250SPA3 type.
1. Locate the probe connection on the back of the unit.
2. Open the 2 locks by pushing them to the sides.
3. Swap to the other probe system.
4. Close the 2 locks by pushing them to the center.
Page 11