Interacoustics AA222 Instructions For Use Manual page 25

AA222 Instructions for Use – EN
License
A
AUD key. When pressing the
enter a new license key for the audiometry module. The new license key is activated by pressing
the
a valid key.
B
IMP key. When pressing the
enter a new license key for the impedance module. The new license key is activated by pressing
the
a valid key.
Light
C
The Display light can be changed by holding the
wheel. You will see the brightness of your screen change according to this setting.
D
The LED light can be changed by holding the
You will see the brightness of the LEDs around the Enter button change according to this
setting. Note that the LED in the probe system cannot be adjusted.
Session settings
Keep session on save will keep the session on the device when pressing save session.
E
System
F
When pressing the
alter the date and time. The following window will pop up
Use the wheel to select day, month, year, hour or minutes. Use the
changes and set date and time or press the
If the AA222 is connected to the Diagnostic Suite, your PC will automatically update the date and
time.
Printer
Under Printer type you can select which printer is connected to the USB port of your AA222. By
G
default, the Sanibel
currently supported.
button. The previous license key will not get changed if the new key is not
button. The previous license key will not get changed if the new key is not
button while Date and time is selected you can manually
buttons to adjust the number. Press the
TM
MPT-III thermal printer is selected. The list below shows the printers
button a pop up window opens in which you can
button a pop up window opens in which you can
button and rotating the
button and rotating the wheel.
button to reject any change made.
Page 21
and
button to keep