Stick Adjustment - FUTABA 14SG Instruction Manual

Note:
*Scroll operation: Circle your finger on the outside edge of
the RTN button. The sensors may mis-read your touch as
a reverse rotation if the circle is smaller, or performed on
the inside edge of the RTN button.
* The SensorTouch™ may not operate smoothly if your
hand is touching the surrounding case parts. Please make
sure that the tip of your finger is actually operating the
SensorTouch™.
*If the SensorTouch™ does not register your input, please
try again after lightly tapping your finger on the sensor
once again.
* Do not operate the SensorTouch™ while wearing gloves.
The SensorTouch™ may not work correctly.
Caution
The touch sensor may not operate
correctly if spark noise is generated from
a gasoline engine, etc. Please remove the
transmitter to a location away from the
noise source.

Stick Adjustment

Adjustment of the stick lever length
You can adjust the length of stick levers, as
you like. It is recommended to adjust the length
of the sticks in line with your hand size.
Lever Head Lever Head
A
1. Hold the lever head "B" and turn the lever
2. Turn the lever-head "A" clockwise as you
Adjustment of stick lever tension
can be adjusted.
1. First, Remove the battery cover on the
2. Next, using a hand, remove the transmitter's
3. Using your hand remove the transmitters
B
head "A" counter-clockwise. The lock will
be released.
hold the lever-head "B" after placing it as
you like.
The tension of the self-return type stick lever
bottom of the transmitter. Next, unplug the
battery wire and remove the battery from
the transmitter.
side cover (rubber). When using Mode 1,
you will need to remove the side cover to
expose the tension screw.
• It is only the mode 1
• Side Cover
rear rubber grips.
•Rear Grip
<Before Use>
•Rear Grip
17