3. Main Features
C3 Advanced series 2/3 " progressive scan camera
Monochrome and Bayer mosaic color versions
1600 (h) x 1200 (v) active pixels
5.5μm square pixels
57dB or more S/N for AM-200GE and 55dB or more for AB-200GE
8-bit, 10-bit or 12-bit output for monochrome and Bayer, or 8-bit output RGB color or
YUV422 output for AB-200GE
40.6 frames/second with full resolution in continuous operation for monochrome or
Bayer 8-bit output
19.2 frames/second for AB-200GE RGB output (in-camera interpolation) and 28.8
frames/second for AB-200GE YUV422 output
Various readout modes, horizontal and vertical binning (AM-200GE only) and AOI (Area
Of Interest) modes for faster frame rates
-3dB to +24dB gain control for AM-200GE and 0dB to +24dB for AB-200GE
10μs (1/100,000) to 2 seconds exposure control in 1μs steps ( Exposure/Timed control
mode)
Timed and trigger width for exposure control
Pre-dump (RCT) and PIV modes for specific applications
ALC to automatically control exposure for changing lighting conditions by combining
auto gain control, auto shutter and auto iris functions
Various pre-processing circuits are provided
Programmable LUT
Gamma correction from 0.45 to 1.0
Shading Correction
Bayer white balance with manual, one-push auto, or continuous (AB-200GE only)
Bayer color interpolation (AB-200GE only)
Blemish compensation
Test pattern signal generator built in
Auto iris lens video output with H-sync
Setup by Windows XP/Vista/7 via serial communication
AM-200GE / AB-200GE
- 9 -