Main Features - IAI CM-080GE User Manual

CM-080GE/CM-080GE-RA / CB-080GE/CB-080GE-RA

3. Main Features

•
Member of Compact series, covering VGA to UXGA resolution
•
1032 (h) x 778 (v) 4.65 µm square pixels for effective output image
•
1/3" progressive scan – monochrome and Bayer mosaic color versions
•
High frame rate of 30.08 frames/second with full resolution in continuous operation
•
30 frames/second with external trigger and full resolution
•
+24dB Gain and noise reduction circuit built-in
•
Increased frame rate with vertical binning (CM-080GE/CM-080GE-RA only) and
partial scan
•
Exposure time from 84μs to 2 sec. using Pulse Width Control trigger mode
•
Programmable exposure from 84μs to 33 ms in Full Frame scan
•
Sequencer trigger mode for on-the –fly change of gain, exposure and ROI
•
Edge Pre-select and Pulse width trigger mode
•
LVAL-synchronous/-asynchronous operation (auto-detect)
•
Auto iris lens video output allows a wider range of light (Can be Selected by DIP
switch )
•
GigE Vision Interface with 10 or 8-bit output
•
Programmable GPIO with opto-isolated inputs and outputs
•
Can be connected with 100BASE-TX
•
Right Angle types are available as CM-080GE-RA and CB-080GE-RA
•
Comprehensive software tools and SDK for Windows XP/Vista
Note: CM/CB-080GE and CM/CB-080GE-RA can be connected with 100BASE-TX.
However, due to the limited bandwidth (100Mbps), the described
specifications such as frame rate, minimum trigger interval and so on cannot
be satisfied for 100BASE-TX connection.
- 7 -