Table of Contents
Advertisement
Step 5: Adjusting the Image Quality
Display the camera image and adjust the image quality.
Displaying the Image
Display the image captured by the camera.
When you push [Play] button, the camera image appears in right area.
eBUS Player for JAI
File Tools Help
Connection
Select / Connect
IP address
N/A
MAC address
N/A
XXXXXXXXXXX
GUID
Vendor
JAI Corporation
GO-2400C-USB
Model
JAI_DEMO
Name
Acquisition Control
Source
Mode
Play
Parameters and Controls
Communication control
Device control
Image stream control
Adjusting the Gain
Adjust the sensitivity via the analog gain (i.e., master gain).
™ For details on gain control, see "Gain Control" (page 29) in the "Main Functions" section.
■ Manual adjustment
1
Expand [Analog Control], and set [Gain Auto] to [Off].
([Off] is the default setting.)
2
Configure the gain.
u Expand [Analog Control], and select the gain you want to configure in [Gain Selector].
• For the GO-5100M-USB, only [Analog All] (master gain) can be configured.
• For the GO-5100C-USB, [Analog All] (master gain), [Digital Red] (digital R gain), and [Digital
Blue] (digital B gain) can be configured individually.
v Configure the gain value in [Gain].
• [Analog All] (master gain) can be set to a value from x1 to x16 (0 dB to +24 dB). The
resolution is set in x0.01 steps (0.005 dB to 0.08 dB depending on the setting value). Values
are configured by multipliers.
• For the GO-5100C-USB, the [Digital Red] (digital R gain) and [Digital Blue] (digital B gain)
can be set to a value from x0.45 to x5.62 (–7 dB to +15 dB) the [Analog All] (master gain)
value. The resolution is set in x0.01 steps.
Disconnect
Stop
Stream: 0 images N/A FPS
Error count: 0 Last error: N/A
Warnings: N/A
N/A Mbps Display: N/A FPS
— 20 —
GO-5100M-USB / GO-5100C-USB
Advertisement
Table of Contents
