Abus SECVEST Installer Manual page 161

Signal strengths
(cont.)
Resetting signal strengths to begin a new measurement.
WEB
Click on the line for the desired component and follow the instructions on the screen.
Click on "Reset ALL" and follow the instructions on the screen. This will clear the
recorded signal strengths for the entire list.
Alarm panel
# key
Press this key to delete the recorded signal strengths for the selected component.
* key
Press this key to delete the recorded signal strengths for the entire list.
Detectors
 The display shows the signal strength of each taught-in detector.
 S/W <2.00.00 The zone names are displayed. To view the zone numbers, press the right
menu key
Wireless control panel
 The display shows the signal strength of each taught-in control device.
External Sirens
 The display shows the signal strength of each taught-in wireless external siren.
WAM
 The display shows the signal strength of each taught-in WAM.
Door locks
The display shows the signal strength of each taught-in door lock.
RF repeater (only alarm panel)
The display shows the signal strength of each taught-in RF repeater.
Under RF repeater below you will find clarifications for the display on the WEB.
RF repeater components (only alarm panel)
The display shows the signal strength of each assigned component to each RF repeater
on the RF repeater.
Under RF repeater below you will find clarifications for the display on the WEB.
Repeat alarm panel
You can find the signal strength of the received messages from the alarm panel
on the repeater here.
Repeat detectors
You can find the signal strength of the received messages from the detectors
on the repeater here.
Repeat wireless control panel
You can find the signal strength of the received messages from the wireless
control panel on the repeater here.
Repeat external sirens
You can find the signal strength of the received messages from the external sirens
on the repeater here.
Configuration
161