Abus SECVEST Installer Manual page 120

Configuration
SIP Dialler Enable
RFC 2833 DTMF
Detection
Note
The alarm control panel works through the communication types in the following order:
1. ARC/ESCC reporting
2. Email
3. Social care (protocol transmission)
4. SMS via GSM
5. Voice dialler
6. SMS via PSTN
Push notifications are independent of this sequence and may occur at any time.
120
as SIP server name
ID, if the recipient has an account with the same SIP service
provider
9876543@sipgate.de
Armed
The SIP dialler is enabled.
Deactivated
Armed
DTMF tones are also detected for SIP under certain requirements.
Deactivated
No detection of DTMF tones.
-
-