Abus SECVEST Installer Manual page 170

Configuration
170
Repeat alarm panel
Here you can find 2 displays
RF repeater
This is the signal strength of the repeater to the alarm panel.
Repeat alarm panel
This is the signal strength of the alarm panel on the repeater.
Note
Both signal strengths are approximately the same. However, the signal strengths "alarm
panel -> repeater" and "repeater -> alarm panel" can deviate slightly from each other.
The reasons for this are:
different antennas on the alarm panel and repeater
different radio wave propagation characteristics in the different directions
Repeat detectors
You can find the signal strength of the received messages from the detectors on the
repeater here.