Abus SECVEST Installer Manual page 194

Appendix
Panic response:
Full set link
4. SYSTEM
General
Language
Display Text
Restore defaults
Default settings
Country defaults
Mains Fault
A/C Fault Reporting
A/C Fail delay
Ext DC Fault reporting
Ext DC Fail delay
Installer details
Installer Name
Installer Code
Installer Tel No
User access
Record Memo
Dual Key Function
Social Care Key
Omit All
Quick Set
Quick Omit
User Code Req'd
2 Way Replies
Remote Inst. Set
Duress Enable
194
Silent (S/W >=2.00.00)
Acoustic (S/W < 2.00.00)
Sub-area 2-4: No
All partitions: No
German
Secvest
On
0 minutes
On
0 minutes
Yes
No
No
Yes
No
No
Yes
Yes
Yes
No
Partition 1 is a common partition.
This value depends on how you
answer the language question during
initial commissioning.
Only appears as part of the factory-
default process.
This setting is required to fulfil
EN50131.
This setting is required to fulfil
EN50131.
This setting is required to fulfil
EN50131.
This setting is required to fulfil
EN50131.
This value depends on how you
answer the "Access Code Length"
and "New Installer Code" questions
during initial commissioning.
This value depends on how you
answer the "Access Code Length"
and "New Installer Code" questions
during initial commissioning.
This setting is required to fulfil
EN50131.
This setting is required to fulfil
EN50131.
EN50131-1, Section 8.3.1
(with reference to EN50131-3,
Section 8.3.1)
Switch to Yes for Duress Code use