Abus SECVEST Installer Manual page 93

Factory Defaults
Upgrade Panel Application
 v2.00.00 – installed
 v2.00.00 07/10/2016 (2621440)
 v1.01.02 25/07/2016 (2293760)
 v1.01.00 16/02/2016 (2293760)
 v1.00.04 01/10/2015 (2293760)
 v1.00.02 26/05/2015 (2293760)
 ...
Country Defaults
 UK
 Italy
 Spain
 Portugal
 Netherlands
 France
 Belgium
 Germany
Note
Every country has different settings for PSTN communication and alarm reporting
or the start and end of summer/winter time (daylight saving time).
Changing the country settings does not change the selected language.
The country defaults are used for the following:
All countries
Automatic time adjustment for summer/winter time (start and end of
summer time, country-specific)
France
FTA (First To Alarm zone lockout) operation
This locks the zone in which the alarm was first triggered in a partition
so that it cannot trigger any further alarms/faults until the zone has been
restored or the alarm control panel has been disarmed.
Denmark
PSTN modem ring tone detection
The PSTN modem ring tone detection algorithm must allow additional time
between the ring tones to establish whether the ringing has stopped. 6 s is
normal, but for Denmark it is 8 s.
Netherlands
The handshake tone frequencies for Fast Format and the
Scancom/Scanfast social care protocols are different in the Netherlands.
Usually, the handshake tone frequencies for Fast Format are
1400 Hz/2300 Hz but they are 1600 Hz/2000 Hz in the Netherlands.
Default settings
The following factory defaults are currently affected by the country defaults,
see below and the "Factory defaults" appendix.
UK
"Installer Mode -> System -> Security -> Jamming" "TAMPER
PROTECTION" factory default
 Switzerland
 Austria
 Ireland
 Norway
 Denmark
 Sweden
 Greece
 Luxembourg
Configuration
93