Abus SECVEST Installer Manual page 249

B1 STATUS
B2 STATUS
OFF HOOK
RFTX
STATUS (GSM module)
No Connection
On green
Connection
Flashing green
Activity
BOM: LED10 Y/G
Battery 1 status
On red
Charging – preparatory treatment or constant current (CC) or
constant voltage (CV).
Off
Charging complete
Flashing red, 0.1 Hz
Timer fault or cell temperature fault
BOM: LED2 red
Battery 2 state
On red
Charging – preparatory treatment or constant current (CC) or
constant voltage (CV).
Off
Charging complete
Flashing red, 0.1 Hz
Timer fault or cell temperature fault
BOM: LED1 red
PSTN or a/b line status
On
The system has "lifted the telephone receiver" for PSTN
Off
The system has "hung up the telephone receiver" for PSTN
BOM: LED3 red
RF transmitter status
On
RF transmitter active
Off
RF transmitter not active
BOM: LED4 red
Status GSM module
Off
Sleep mode
Flashing for 0.1 s in a period of 1 s
Network search or no network status (including if the SIM card is
not inserted and the PIN number is approved)
Flashing for 0.1 s in a period of 3 s
Connected to a 2G network
Flashing for 0.1 s in a period of 0.125 s
GPRS data service
On
Voice call
BOM: LEDx red
Appendix
249