Security settings
Name/function
6 digit user code
Explanation (checkbox)
Note:
From S/W 1.01.00 onwards, this menu item no longer exists. It is only possible
to decide between 4 Digit User Codes and 6 Digit User Codes in the Start Wizard.
It is no longer possible to change the length of the code once the wizard has been
completed.
Armed
6-digit numerical code for installer and user
Deactivated
4-digit numerical code for installer and user
Note
Switching from 4 to 6 digits
When switching from 4 to 6-digit numerical codes, "00" is automatically
added to the end of the existing 4-digit codes.
Example: "1234" becomes "123400".
Switching from 6 to 4 digits
When switching from 6 to 4-digit numerical codes, all codes are reset.
When the numerical codes are reset (from 6 to 4 digits), all users and
installers are reset to their factory defaults (remote controls, Prox Tags, etc.
are deleted).
Configuration
107