D-Link DXS-3400 SERIES Web Ui Reference Manual page 332

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
The fields that can be configured in DHCP Snooping Database are described below:
Parameter
Write Delay
Click the Reset button to reset the information entered.
Click the Apply button to accept the changes made.
The fields that can be configured in Store DHCP Snooping Database are described below:
Parameter
URL
Click the Apply button to accept the changes made.
The fields that can be configured in Load DHCP Snooping Database are described below:
Parameter
URL
Click the Apply button to accept the changes made.
Click the Clear button to clear all the counter information.
DHCP Snooping Binding Entry
This window is used to display and configure the DHCP snooping binding entries.
Figure 9-42 DHCP Snooping Database Window
Description
Enter the write delay time value here. This value must be between 60 and 86400
seconds. By default, this value is 300 seconds.
Description
Select the location from the drop-down list and enter the URL where the DHCP
snooping database will be stored to here. Locations to choose from are TFTP,
FTP, and Flash. An example URL is given.
Description
Select the location from the drop-down list and enter the URL where the DHCP
snooping database will be loaded from here. Locations to choose from are TFTP,
FTP, and Flash. An example URL is given.
322