Extended Ipv6 Acl - D-Link DXS-3400 SERIES Web Ui Reference Manual

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
Click the Back button to discard the changes made and return to the previous page.

Extended IPv6 ACL

After selecting an Extended IPv6 ACL and clicking the Add Rule button, the following page will appear.
The fields that can be configured are described below:
Parameter
Sequence No.
Action
Protocol Type
Source
Figure 8-14 Extended IPv6 ACL (Add Rule) Window
Description
Enter the sequence number of this ACL rule here. The range is from 1 to 65535. If
this value is not specified, the system will automatically generate an ACL rule
number for this entry.
Select the action that this rule will take here. Options to choose from are Permit
and Deny.
Select the protocol type option here. Options to choose from are TCP, UDP,
ICMP, Protocol ID, ESP (50), PCP (108), SCTP (132), and None.
• Value - The protocol ID can also manually be entered here. The range is
from 0 to 255.
• Mask - After selecting the Protocol ID option, manually enter the protocol
mask value here. The range is from 0x0 to 0xFF.
• Fragments - Select this option to include packet fragment filtering.
Select and enter the source IPv6 information here. Options to choose from are
Any, Host, and IPv6.
• When the Any option is selected, any source traffic will be evaluated
according to the conditions of this rule.
279