Bfd Neighbor Table - D-Link DXS-3400 SERIES Web Ui Reference Manual

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
Click the Find button to find and display an entry based on the information entered.
Click the Edit button to configure the interval settings for the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Edit button, the fields that can be configured are described below:
Parameter
MinTxInt
MinRxInt
Multiplier
Slow Time
Click the Apply button to accept the changes made.

BFD Neighbor Table

This window is used to display the BFD neighbor table.
To view the following window, click L3 Features > BFD > BFD Neighbor Table, as shown below:
Click the Show Detail button to view more detailed information for the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Show Detail button, the following page will appear.
Click the Back button to return to the previous window.
Description
Enter the minimum time interval value that the local system will use when
transmitting BFD control packets here. The range is from 50 to 1000 milliseconds.
Enter the minimum time interval value between received BFD control packets that
this system is capable of supporting here. The range is from 50 to 1000
milliseconds.
Enter the BFD detection time multiplier value here. The range is from 3 to 99.
Enter the BFD slow time value here. The range is from 1000 to 3000 milliseconds.
Figure 6-40 BFD Neighbor Table Window
Figure 6-41 BFD Neighbor Table (Show Detail) Window
218