D-Link DXS-3400 SERIES Web Ui Reference Manual page 380

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
Parameter
Domain Level
Click the Apply button to accept the changes made.
Click the Edit button to modify the specified entry.
Click the Delete button to delete the specified entry.
Click the Add MA button to add a new Maintenance Association (MA) rule.
After clicking the Edit button, the following page will appear.
The fields that can be configured in the table are described below:
Parameter
MIP Creation
SenderID TLV
Description
easy identification of administrative responsibility for each maintenance domain.
Enter the Maintenance Domain's (MD's) level here. The range is from 0 to 7. A
unique MD level is assigned to define the hierarchical relationship between
domains. The larger range of domain has the higher value of level.
Figure 10-2 CFM Settings (Edit) Window
Description
Select the Maintenance domain Intermediate Point (MIP) option here. The
creation of MIPs on a maintenance domain is useful for tracing the link, MIP by
MIP. It also allows the user to perform a loopback from an MEP to an MIP. An
enumerated value indicates whether the management entity can create MIP Half
Functions (MHF) for a maintenance domain.
Options to choose from are None, Auto, and Explicit.
• None - Specifies not to create the MIP for a maintenance domain.
• Auto - Specifies that MIPs will be created on any port for the MAs in this
maintenance domain, when there is no MEP configured on that port for the
MAs with the same VID at this MD level or any higher active MD levels, and
at the same time there is an MEP configured on that port for the MA with the
same VID at the next lower active MD level or there is no MA with the same
VID at any lower active MD levels. For an intermediate Switch in an MA, the
setting must be Auto in order for the MIPs to be created on this device.
• Explicit - Specifies that MIPs will be created on any port for the MAs in this
maintenance domain, when there is no MEP configured on that port for the
MAs with the same VID at this MD level or any higher active MD levels, and
at the same time there is an MEP configured on that port for the MA with the
same VID at the next lower active MD level.
This option is used to configure the default transmission of the sender ID TLV by
MPs in an MD. Select one of the following options:
• None - Specifies not to transmit the sender ID TLV.
370