Authentication Sessions Information - D-Link DXS-3400 SERIES Web Ui Reference Manual

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
From Port ~ To Port
Direction
Port Control
Forward PDU
MaxReq
PAE Authenticator
Server Timeout
SuppTimeout
TX Period
Click the Apply button to accept the changes made.

Authentication Sessions Information

This window is used to display and configure the authentication session information.
To view the following window, click Security > 802.1X > Authentication Sessions Information, as shown below:
Figure 9-13 802.1X Port Settings Window
Description
Select the Switch unit that will be used for this configuration here.
Select the appropriate port range used for the configuration here.
Select the direction here. Options to choose from are Both and In. This option
configures the direction of the traffic on a controlled port as unidirectional (In) or
bidirectional (Both).
Select the port control option here. Options to choose from are ForceAuthorized,
Auto, and ForceUnauthorized. If the port control is set to force-authorized, then
the port is not controlled in both directions. If the port control is set to automatic,
then the access to the port for the controlled direction needs to be authenticated.
If the port control is set to force-unauthorized, then the access to the port for the
controlled direction is blocked.
Select to enable or disable the forward PDU option here.
Enter the maximum required times value here. This value must be between 1 and
10. By default, this option is 2. This option configures the maximum number of
times that the backend authentication state machine will retransmit an Extensible
Authentication Protocol (EAP) request frame to the supplicant before restarting
the authentication process.
Select to enable or disable the PAE authenticator option here. This option
configures a specific port as an IEEE 802.1X port access entity (PAE)
authenticator.
Enter the server timeout value here. This value must be between 1 and 65535
seconds. By default, this value is 30 seconds.
Enter the supplicant timeout value here. This value must be between 1 and 65535
seconds. By default, this value is 30 seconds.
Enter the transmission period value here. This value must be between 1 and
65535 seconds. By default, this value is 30 seconds.
302