Session Timeout; Dhcp; Service Dhcp - D-Link DXS-3400 SERIES Web Ui Reference Manual

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide

Session Timeout

This window is used to display and configure the session timeout settings.
To view the following window, click Management > Session Timeout, as shown below:
The fields that can be configured are described below:
Parameter
Web Session Timeout
Console Session Timeout
Telnet Session Timeout
SSH Session Timeout
Click the Apply button to accept the changes made.

DHCP

Service DHCP

This window is used to display and configure the DHCP relay and server service on the Switch.
To view the following window, click Management > DHCP > Service DHCP, as shown below:
The fields that can be configured in Service DHCP are described below:
Figure 4-24 Session Timeout Window
Description
Enter the time in seconds of the web session timeout. Tick the Default check box
to return to the default setting. The value is from 60 to 36000 seconds. The
default value is 180 seconds.
Enter the time in minutes of the web session timeout. Tick the Default check box
to return to the default setting. The value is from 0 to 1439 minutes. 0 means
never timeout. The default value is 3 minutes.
Enter the time in minutes of the Telnet session timeout. Tick the Default check
box to return to the default setting. The value is from 0 to 1439 minutes. 0 means
never timeout. The default value is 3 minutes.
Enter the time in minutes of the SSH session timeout. Tick the Default check box
to return to the default setting. The value is from 0 to 1439 minutes. 0 means
never timeout. The default value is 3 minutes.
Figure 4-25 Service DHCP Window
45